background image

 

 

8

If you cannot connect... 

If the Wireless Portable Router does not respond, please check following: 

 

The Wireless Portable Router is properly installed, LAN connection is OK, and it 
is already powered ON. You can test the connection by using the "

Ping

command: 

 

Please go to 

Start

>

Run…

> Enter “

cmd

” command in the column to open 

the MS-DOS window.  

 

 

 Enter the command: 

 ping 192.168.1.254

 

 

If no response is received, either the connection is not working, or your PC's IP 
address is not compatible with the Wireless Portable Router's IP Address. (See 
next item.) 

 

If your PC is using a fixed IP address, its IP address must be within the range 
192.168.1.1. to 192.168.1.253 to be compatible with the Wireless Portable Router's 
default IP Address of 192.168.1.254. Also, the Network 

Mask

 must be set to 

255.255.255.0. See 

Chapter 4 - PC Configuration

 for details on checking your PC's 

TCP/IP settings. 

 

Ensure that your PC and the Wireless Portable Router are on the same network 
segment. (If you don't have a router, this must be the case.)  

 

Ensure you are using the wired LAN interface. The Wireless interface can only be 
used if its configuration matches your PC's wireless settings.

 

 

 

Содержание ABOWAY WR5204E










































































Отзывы: