Abode pro A21SM3001, Руководство пользователя

Страница: 16 / 27

16
Using your steam cleaner
Steam mopping
Before using the steam unit as a mop, attach the following parts:
•
The extension pole in the top of the main unit (fig 1, page 10.)
•
Place the microfibre pad over the steam mop head (fig 3, page 11.)
•
Push the steam mop head into the steam unit until it clicks into place (fig
2, page 10.)
Tilt the mop back at a 45° angle.
Use a steady back and forth motion over the floor you are
mopping.
The microfibre pad provided is very absorbent, however,
depending on many conditions, i.e. floor surface and steam
intensity setting, residual moisture may still be left behind.
If this occurs please allow air-dry time. Steam cleaning on all hard-
sealed floors will always leave a trail of wet moisture. If you are
finding your floor too wet after use, you may need to adjust the
steam settings.
Handheld steam cleaning
Before using the steam unit as a handheld cleaner, attach the desired parts:
•
Jet nozzle adaptor – page 12
•
Round brush – page 14
•
Crevice brush – page 14
•
Utility head with squeegee and small cloth – page 12/13.
Use a steady back and forth motion over the desired area.
IMPORTANT:
Do not hold the steam unit concentrated in one place for too long and only use on sealed
floor surfaces.
To control the steam temperature and the cleaning power, move the handle closer to or
further away from the surface being cleaned, or refer to page 17.