23
Wi-Fi Protected Setup (WPS)
You can setup security easily by choosing
PIN
(Personal Identification Number) or
PBC
(Push Button Communication) method to do WPS. This page allows you to change the
WPS setting. Using this feature could let your wireless client automatically synchronize its
setting and connect to the HomePlug AV in a minute without any hassle.
Disable WPS
Check to turn ON/OFF WPS.
Save
After completing the setting on this page, click
Save
button to save the
settings.
Reset
Back to last saved data.
Reset
Configure
Reset WPS status to un-configured status.
Self-PIN
Number
Here shows the AP’s PIN code. An external registrar uses this PIN
code to ask the AP to hold a WPS connection.
Soft Push
Button
Click
Start PBC
button to make a WPS connection with other PBC
WPS devices.
Enrolle’s PIN
Number
Enter Enrollee’s PIN code here, and click Start PIN to make WPS
connection with the PIN WPS device.
