15
1.10 Set up Multiple powerline Network
You can add multiple powerline networks between your exiting powerline circuit. For
example, a powerline network already exists in your home, now you want to separate the
printer from your laptop.
powerline_A
powerline_B
laptop
printer
powerline_C router device
1. Change a new Network Name (for example “powerline_new”) on A. This disconnects
A from B.
2. Change the Network Name on C to be “powerline_new” too, this must be done in 120
seconds after step1 in this section.
3. Wait for about 60 seconds while A and C connected.
If the HomePlug
lights on both powerline devices do not light up, the powerline devices are not
connected. Repeat step 2 in this section.
4. Now you have two separate powerline networks.
powerline_A
powerline_B
laptop
printer powerline_C router device
1.10 Set up Multiple powerline Network
