Abit IS7-G страница 67 Скачать руководство пользователя

Страница: 67 / 110

BIOS Setup

3-13

Master/Slave Drive Ultra DMA (For IS7-G, IS7, IS7-E, and IS7-M only)

This item allows you to set the Ultra DMA in use.

[Auto]:

The BIOS will select the best available option after checking your hard drive or CD-ROM.

[Disabled]:

The BIOS will not detect these categories. If problem arises in using Ultra DMA devices, try

disabling this item.

OnChip IDE-2 Controller:

The description is same as the

OnChip IDE-1 Controller.

OnChip Serial ATA Mode: (For IS7-G and IS7 only)

This item determines the mode for on-chip Serial ATA.

[IDE]:

The on-chip Serial ATA served as IDE Mode.

[RAID]:

The on-chip Serial ATA served as RAID Mode.

NOTE:

The [RAID] option is only available when the item “OnChip Serial ATA” is set as [Enhanced

Mode].

SATA RAID ROM:

This item allows you to use the boot ROM of on-chip Serial ATA RAID to boot-up system.

OnChip Serial ATA:

This item determines the function for on-chip Serial ATA.

[Disabled]:

Disable the Serial ATA controller.

[Auto]:

Allows the Serial ATA controller to be arranged by BIOS automatically.

[Combined Mode]:

Parallel ATA and Serial ATA are combined together. Supports up to 4 IDE drives.

[Enhanced Mode]:

Enable both Parallel ATA and Serial ATA. Supports up to 6 IDE drives.

[SATA Only]:

The SATA is operating in legacy mode.

User’s Manual

Содержание IS7-G















































































































Результаты поиска

Содержание IS7-G

Отзывы:

Похожие инструкции для IS7-G

Бренды по названию

Популярные бренды

Abit IS7-G, Руководство пользователя

Результаты поиска

Содержание IS7-G

Отзывы:

Похожие инструкции для IS7-G

Бренды по названию

Популярные бренды