manualshive.com logo in svg

Abit BG7E, Руководство пользователя, Страница: 91 / 104

Поделиться
Скачать
Abit BG7E Скачать руководство пользователя страница 91

Hardware Monitoring (The Winbond Hardware Doctor Utility) 

H-1 

Appendix H.  Hardware Monitoring (The Winbond 

Hardware Doctor Utility) 

The Winbond Hardware Doctor is a self-diagnostic system for PCs used with Winbond W83627HF 
chipset. It protects PC hardware by monitoring several critical items including power supply voltages, 
CPU & system fan speeds and CPU and system temperatures. These items are important for the system 
operation. Errors may result in permanent damage to the PC. Once any item is out of its normal range, a 
warning message pops up reminding you to take proper measures. 

 

Insert the Installation Disk into CD-ROM drive, 
it should execute the installation program 
automatically. If not, double-click the execution 
file at the main directory of this Installation 
Disk to enter the installation menu. 

 

1. 

Click “

Hardware Doctor

”. 

 

2. 

Click “

Next >

”. 

 

Click “

Next >

”. 

3. 

 

Click “

Next >

”. 

4. 

 

Click “

Next >

”. 

5. 

User’s Manual 

Содержание BG7E









































































































Отзывы:

Нет отзывов