manualshive.com logo in svg

Abit BG7E, Руководство пользователя, Страница: 39 / 104

Поделиться
Скачать
Abit BG7E Скачать руководство пользователя страница 39

Hardware Setup 

2-7 

(6). FPIO4 

Headers 

This header is used for connecting switches and LED indicators on the chassis front panel. 

Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below 
stands for positive polarity for the LED connection. Please pay attention to connect these headers. A 
wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could 
cause system malfunction. 

 

 

• 

Pin 1-3: HDD-LED 

Connects to the HDD LED cable of chassis front panel. 

• 

Pin 5-7: RESET 

Connects to the Reset Switch cable of chassis front panel. 

• 

Pin 15-21: SPEAKER 

Connects to the System Speaker cable of chassis. 

• 

Pin 2-4: SP-LED 

Connects to the Suspend LED cable (if there is one) of chassis front panel. 

• 

Pin 6-8: PWR-ON 

Connects to the Power Switch cable of chassis front panel. 

• 

Pin 16-20: PWR-LED 

Connects to the Power LED cable of chassis front panel. 

• 

Pin 22-24: KEYLOCK 

Connects to the Keylock cable (if there is one) of chassis front panel. 

User’s Manual 

Содержание BG7E









































































































Отзывы:

Нет отзывов