Ability 510M, Руководство пользователя

Страница: 24 / 32

24 Using the system
User’s manual
4-7
Keypad settings
This option allows you to program the display and buzzer settings.
• Brightness - the level of brightness of the display and key LEDs, when
a key is pressed and held for 20 seconds.
• Standby brightness - the level of brightness of the display and key
LEDs during standby status.
• Contrast - allows you to adjust the black/white contrast.
• Volume - allows you to adjust the buzzer volume (3 levels available).
•• Off
•• Low volume
•• High volume
These settings apply only to the keypad you are working on, and will be saved
even in the event of panel shutdown.
Via Keypad
Method 1
Activate the shortcut assigned to the “Keypad sett.menu” (shortcut n.13)
and associated with one of the following keys to (shown on
the display) with or without code entry, to access the "Keypad
settings”section of the User Menu.
1. Use keys and followed by to select the required parame-
ters.
2. Use keys and to increase or decrease the value of the
selected parameter.
3. Press to save.
Method 2
Access the “Keypad Settings” section of the User Menu by means of a valid
PIN.
Follow the instructions described in Method 1 .
4-8
Change PIN
This section allows you to change your User Code PIN. If your code has
"Main User" status, it will also allow you to change the PINs of other users
but not of other "Main Users".
Via Keypad
Method 1
Activate the shortcut assigned to the “Change PIN” (shortcut n.27) and
associated with one of the following keys to to (shown on the
display), with or without code entry, to access the "Change PIN" section of
the User Menu.
1. Use keys and followed by to select the user code you
wish to change.
2. Type-in the new PIN (4, 5 or 6 digits) using keys to then
p ress .
3. Type-in the new PIN again using keys to then p ress
to save.
Method 2
Access the “Keypad Settings” section of the User Menu by means of a valid
PIN.
Follow the instructions described in Method 1 .
B r i g h t n e s s
1 8 : 2 3 2 0 / 0 8 / 2 0 1 1
D D D D D
N o a l a r m s
N o f a u l t s
C o d e R u p e r t
O u t p u t s O N / O F F
S e t d a t e / t i m e
S e t K e y p a d
Method 2.
T y p e - i n C o d e
* * * * * *
S e t K e y p a d
B r i g h t n e s s
BrightnessStdby
C o n t r a s t
Method 1.
T y p e - i n C o d e
* * * * * *
C o d e R u p e r t
D a t e / T i m e
S e t K e y p a d
C h a n g e P I N
Method 2.
Method 1.
C h a n g e P I N
C O D E 0 0 1
C O D E 0 0 2
C O D E 0 0 3
1 8 : 2 3 2 0 / 0 8 / 2 0 1 1
D D D D D
N o a l a r m s
N o f a u l t s