Ability 510M, Руководство пользователя

Страница: 15 / 32

User’s manual
The Ability system 15
Nota Bene
If an operation is successful, but the corresponding LED fails to light, it is an
indication that the battery is low .
The battery must be replaced before it runs out completely.
2-7
Multi-system access
Users can access several systems using the same code/key/keyfob. The
user code, key or keyfob must be enrolled separately on the control panels
concerned, and can be programmed with different attributes and functions
in accordance with the requirements of each specific system.
The keys and codes provide the systems with random codes (for keys) or
PINs (for codes) which the system associates with the respective attributes
and functions programmed by the installer. For example, a user key/code
may be enabled on partitions 1 and 2 on system A, on partitions 3 and 4
on system B and on partitions 4 and 5 on system C.
This operating method is possible for all keys and codes.
2-8
Telephone and voice
functions
Each Ability control panel events can be associated with report calls to an
Alarm Receiving Centre (via a digital dialer) and to contact numbers (via a
voice dialer).
The installer can associate a voice message with an event; each message is
customizable for the user.
2-9
Arming Scenarios
A scenario is a configuration (programmed by the installer in accordance
with the user's needs) which arms/disarms the various partitions of the
Ability security system and activates one or more outputs.
For instance, if all the building occupants leave the premises, they apply
the Away arming mode. Therefore, they arm all the partitions and activate
all the outputs which close the rollerblinds and switch off the lights.
However, if people remain on the premises, they need to apply an arming
configuration which allows them to move freely in parts of the premises
(e.g. upstairs) and activate the outputs which switch on the night lights,
etc.
The installer will programme the system in accordance with these needs
and create suitable arming configurations (scenarios). These scenarios can
be activated by the users via keypads, readers, remote controls and over-
the phone by means of arming shortcuts (refer to
Chapter 3 - Shortcuts ).
Feedback from panel
Confirmation LED -
green
Confirmation LED - red Buzzer signal
Command not
received
1 flash
Operation not done 4 flashes
bop (audible
error signal)
Operation done 3 flashes long beep