Ability 510M, Руководство пользователя

Страница: 20 / 32

20 Using the system
User’s manual
• The shortcut assigned to “Arm/Disarm menu” (shortcut n.9), allows you
to view the respective section and arm (in Stay or Away mode) or
disarm each partition separately.
1. Use keys and to select the required partition.
2. Use keys and to select the required operating mode (Stay, Away,
Instant, Disarm, Hold).
3. Once the required operation has been selected, press .
Method 2
Access the "Arm/Disarm" section of the User menu by means of a valid
PIN.
Follow the instructions described in Method 1 .
Via Reader
Hold a valid key in the vicinity of the reader and select the LED or
description relating to an “Arm/Disarm” shortcut (shortcut n.1). The
system will apply the programmed scenario
Via Command Zone
Under normal circumstances, a command zone comprises a mechanical key-
lock or callpoint which activates an electrical contact wired to the command
zone. In accordance with how the command zone is configured, it is possible
to:
• arm the partitions the zone belongs to
• disarm the partitions the zone belongs to
• switch the status of the partitions (arm any disarmed partitions and disarm any
armed partitions, refer to “Switch Zone” in
Appendix A, Technical terminology and
Glossary )
• arm the partitions the zone belongs to when the command zone is
violated, and disarm the partitions the zone belongs to when it restores
to standby
Via Wireless keyfob
Push the respective button on the keyfob and verify the outcome of the
requested operation, as described in paragraph
2-6-1 Air2-KF100 Wireless
keyfobs .
Via Auto-arm operations
If a partition is associated with a timer which controls automatic-arming
operations, it will arm when the timer switches ON and disarm when the
timer switches OFF. Users who are enabled to control Auto-arm operations
(refer to paragraph
4-3 Activations ) must:
• activate the timer associated with the Auto-arm operations
• enable the Auto-arm option for the partitions concerned
4-3
Activations
The activation/deactivation of the Ability system peripherals and elements
(described in the following section) enables them to operate in accordance
with their settings (activation) or disables their functions completely
(deactivation). The user has full control over activation/deactivation of the
Ability system peripherals and elements.
The following section describes the consequences of activation/
deactivation.
• Zone - a deactivated zone (bypassed zone) cannot generate alarms.
• Auto-arm operations - can be activated/deactivated separately on
each single partition If this option is enabled on a partition, it will arm
and disarm in accordance with the On/Off settings of the respective
timer.
• Codes - deactivated (disabled) codes cannot access the system.
• Keys - deactivated (disabled) keys cannot access the system.
• Keypads - deactivated (disabled) keypads cannot provide access to the
system, therefore, cannot generate commands or shortcuts. The signals
on the LEDs and display will be updated.
Armed in Away mode
done
Method 1.
1 8 : 2 3 2 0 / 0 8 / 2 0 1 1
D D D D D
N o a l a r m s
N o f a u l t s
C o d e R u p e r t
M a n a g e a l a r m s
A r m / D i s a r m o p s .
A c t i v a t i o n s
A r m / D i s a r m o p s .
P A R T I T I O N 0 0 1
A w a y
A D S - -
Method 2.
T y p e - i n C o d e
* * * * * *
Method 2.
Method 2.
Method 1.