xFUME POWER 250
12 Disposal
EN
-
35
12 Disposal
12.1 Disposal of welding dust
All welding dust collected must be disposed of in accordance with local regulations.
12.2 Disposal of materials
This product is mainly made of metallic materials, which can be melted in steel and iron works and are thus
almost infinitely recyclable. The plastic materials used are labelled in preparation for their sorting and
separation for later recycling.
12.3 Disposal of consumables
Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system. These
substances must be stored, transported and disposed of in suitable containers. Contaminated cleaning tools
(brushes, rags, etc.) must also be disposed of in accordance with the information provided by the
consumables’ manufacturer.
► Please observe the relevant local regulations and disposal instructions in the safety data sheets
specified by the manufacturer of the consumables.
The disposal of dust collecting bags and disposal bags is subject to special waste regulations. The dust must
not enter sewage systems or be disposed of together with normal household waste.
► Observe the local and official regulations.
12.4 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.
13 Warranty
This product is an original ABICOR BINZEL product. Alexander Binzel Schweisstechnik GmbH & Co. KG
guarantees that the product has been manufactured without defects and offers factory manufacturing and
functional warranty for this product upon delivery in line with current state-of-the-art technology and the
current regulations. If ABICOR BINZEL is responsible for a defect that is present, ABICOR BINZEL is obliged
to remedy the defect or deliver a replacement at its own cost and its own discretion. The warranty covers
manufacturing faults, but not damage resulting from natural wear and tear, overloading or improper use.
The warranty period is defined in the General Terms and Conditions. Exceptions in the case of specific
products are regulated separately. Warranty will also be rendered invalid if spare parts and wearing parts
are used that are not original ABICOR BINZEL parts and if the product has been repaired improperly by the
user or a third party.
Wearing parts are excluded in general from the warranty. In addition, ABICOR BINZEL is not liable for
damage caused by using our products. Questions about warranty and service can be addressed to the
manufacturer or our distributors. For more information, visit www.binzel-abicor.com.
Equipment marked with this symbol is covered by European Directive 2012/19/EU on
waste electrical and electronic equipment (WEEE).
► Do not dispose of electrical devices with household waste.
► Disassemble electrical devices before they are disposed of.
► Separately collect components of electrical devices and recycle in an environmentally
responsible manner.
► Observe local regulations, laws, provisions, standards and guidelines.
► Please consult your local authority for information about collection and return of
electrical devices.
Содержание xFUME POWER 250
Страница 37: ...xFUME POWER 250 13 Gewährleistung DE 37 ...
