BAL.0014 • 2019-01-16
EN - 9
WH / WHPP
4 Scope of delivery
3.3 Type plate
The Welding torch system WH/WHPP is identified by a sticker on the machine side connection
housing.
When making any inquiries, please remember the following information:
• Specify the certificate of conformity, Production stamp on the torch neck, for example
WH 455D, Sticker data
3.4 Signs and symbols used
The following signs and symbols are used in the operating instructions:
4 Scope of delivery
The hose assemblies for the Welding torch system WH/WHPP are available in standard lengths
or in customer-specific lengths. Option: Almost all robot controls include the option of seam
finding by means of a tactile sensor.
ABICOR BINZEL
has the torch equipment required for
this. The "Sensor" option provides the gas nozzle potential at the machine side control line.
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the
current product catalogue. Contact details for advice and orders can be found online at
Symbol
Description
•
Bullet symbol for instructions and lists
Cross reference symbol refers to detailed, supplementary or further information
1
Step(s) described in the text to be carried out in succession
• Various small parts as accessories (hand lever for manual control, pan head screws M3x10 (6) for
fastening the holder, sealing grease, silicone-free for greasing the O-rings and coupling parts, for
WHPP also a fuse with holder)
• Operating instructions
• ROBO hose assembly
When equipped with the ROBO hose assembly, the Welding torch system WH/WHPP is not functioning.
For the initial assembly, additional components are required which depend on the welding task at hand.
They include the following:
• Torch neck (in the preferred size and geometry)
• Holder (required for fastening to the robot)
• Set-up parts and wearing parts (order separately)
Tab. 8
Components
