Abicor Binzel FEC W3, Инструкция по эксплуатации

Страница: 53 / 132

FEC W3 9 Maintenance and cleaning
BAL.0675.0 • 2019-09-16
EN - 21
1 Connect the compressed air supply.
2 Open the valve lever (1) at the compressed air connector (2) .
The compressed air produces a dedusting jet and causes the dedusting nozzle to rotate inside the W3 filter cartridge.
3 Manually move the cleaning lance (3) up and down.
The W3 filter cartridge (4) is cleaned by the manual up and down movements of the cleaning lance (3) .
4 Close the valve lever (1) at the compressed air connector (2) .
5 Disconnect the air supply once the FEC W3 cleaning process is complete.
6 Empty the separated dust from the filter housing in the supplied dust collecting bag.

Fig. 12 Emptying the filter housing on page EN-22
1 Valve lever
2 Compressed air connection for
dedusting
3 Cleaning lance 4 W3 filter cartridge 5 Air vent for cleaning
Fig. 11 Cleaning of the W3 filter cartridge
NOTICE
• The cover of the air vent for cleaning (5) opens when compressed air is supplied. After cleaning, ensure that the cover
closes again, otherwise the suction power will be negatively impacted.
• The supplied air is directed via the bypass filter into the open air so that excess pressure does not build inside the filter
chamber.

Fig. 15 Replacing the exhaust air filter on page EN-25
1
2
3
4
5