EN - 5
Welding torch ERGO
4 Putting into operation
4 Putting into operation
4.1 Setting up the torch
Set up the torch neck according to the following figure:
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Switch off the power source.
• Close the gas supply.
• Close the compressed air supply.
• Disconnect the mains plug.
CAUTION
Risk of injury
Puncture or cut-in wounds may be caused by the wire electrode.
• Wear protective gloves and never reach into the danger zone.
1
Type ERGO 15
2
Gas diffuser
3
Contact tip
4
Tip adaptor
5
Gas diffuser
6
Torch neck
7
Type ERGO 501D
8
Type ERGO 24/36
9
Gas nozzle
10
Type ERGO 25
Fig. 1
Setting up the torch
1
2
3
4
5
6
7
8
9
10
