Abicor Binzel DAV, Руководство по эксплуатации

Страница: 8 / 18

EN - 8
BAL.0789.0 • 2020-03-02
5 Functional description DAV
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully rule out the risk of transport
damage.
4.2 Storage
Physical storage conditions in a closed environment:

Tab. 2 Ambient conditions for transport and storage on page EN-6
5 Functional description
The housing (5) is attached to the actuating side of the cylinder (9) . The housing (5) consists of the slide (7) with the cutter
(6) and the counter support (3) . When the wire cutter is activated, the cylinder (9) pushes the slide (7) forward. The counter
support (3) then clamps the free wire end with spring force at the fixed jaws (4) . The cutter (6) on the slide (7) extends the
full cylinder stroke and cuts the wire. The position of the pneumatic cylinder is monitored by the optional end position
prompt
(8) and torch clamp (1) . At a minimum of 5 bar operating pressure, the cylinder (9) is set in pneumatic end positions.
Signal evaluation is managed by a higher-level safety circuit.
Goods-in inspection Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of complaints If the delivery has been damaged during transport, contact the last carrier immediately.
Retain the packaging for potential inspection by the carrier.
Packaging for returns Where possible, use the original packaging and the original packaging material. If you have
questions concerning packaging and safety during shipment, please consult your supplier,
carrier or transporter.
Tab. 8 Transport
1 Optional torch clamp
2 Cover
3 Counter support with pressure spring
4 Jaws
5 Housing
6 Cutter
7 Slide
8 Optional end position prompt with LED display
9 Cylinder
10 Mounting bracket
Fig. 3 Functional description
AF 4
1 Nm
AF 2.5
3
4
5
6
7 8
9
10
1
2