Abicor Binzel ADF735S, Оригинальная инструкция по эксплуатации

Страница: 13 / 72

EN-13
cartridge into frame per fig. 8 below. Make sure that the ADF cartridge is inserted in ADF
holder correctly as shown. Install ADF holder assembly into helmet shell.
• CLEANING
Clean helmet by wiping with a soft cloth. Clean the auto darkening filter surfaces regularly.
Do not use strong cleaning solutions. Clean sensors and solar cells with methylated spirit
and a clean cloth and wipe dry with a lint-free cloth.
fig. 7 fig. 8
TECHNICAL SPECIFICATIONS
Optical Class:
Viewing Area:
Cartridge Size:
Arc Sensor:
Light State:
Dark State:
Shade Control:
Power On/Off:
Sensitivity Control:
UV/IR Protection:
Power Supply:
Low Battery Alarm:
Switching Time:
Dark to Light:
1 / 1 / 1 / 2
96 × 53 mm (3.78" × 2.09")
110 × 90 × 9 mm (4.33" × 3.54" × 0.35")
4
DIN 3.5
Variable Shade 9 ~ 13
External, Variable Sade
Automatic On / Off
Low ~ High, by infinitely dial knob
Up to Shade DIN16 at all times
Solar cell. Battery replaceable;
1 × CR2450 lithium battery
Yes
1/ 25. 000 s. from Light to Dark
0.1–1.0 s by infinitely dial knob
Low Amperage TIG Rated: ≥ 5 amps (DC); ≥ 5 amps (AC)
Grinding: Yes
Battery Capacity Test: Yes
Operating Temp.: − 10 °C – +55 °C (14 °F – 131 °F)
Storing Temp.: − 20 °C – +70 °C ( − 4 °F – 158 °F)
Helmet Material: High Impact Resistance Nylon
Total Weight: 440 g
Application Range: Stick Welding (SMAW); TIG DC∾ TIG Pulse DC;
TIG Pulse AC; MIG/MAG/CO2; MIG/MAG Pulse;
Plasma Arc Cutting (PAC); Plasma Arc Welding (PAW);
Air Carbon Arc Cutting (CAC-A); Grinding
Approved: CE, UKCA