Abicor Binzel Abitig WH 220W70, Руководство по эксплуатации

Страница: 31 / 88

BAL.0111 • 2020-01-29 EN - 11
ABITIG
®
WH 6 Putting into operation
Equip the torch neck according to the following figure:
1 Insert the electrode holder (5) into the torch body (1) from the front.
2 Insert the tungsten electrode (3) into the electrode holder (5) from the front.
3 Hold the tungsten electrode (3) and the electrode holder (5) and screw on torch cap (4) .
4 Screw gas nozzle (2) onto torch body (1) .
6.1.1 Equipping TIG welding torches 200WS and 400WS
1 Insert the electrode holder (5) into the torch body (1) from the front.
2 Insert the tungsten electrode (3) into the electrode holder (5) from the front.
3 Hold the tungsten electrode (3) and the electrode holder (5) and tighten the clamping
element using a torque wrench.

Tab. 12 Tightening torques on page EN-11.
4 Screw gas nozzle (2) onto torch body (1) .
1 Torch body
2 Gas nozzle
3 Tungsten electrode
4 Torch cap
5 Electrode holder
Fig. 2 Equipping the torch
1
5 3 4 2
Step 1 Step 2-3
Step 4
ABITIG
®
WH 220WS max. 1 Nm
ABITIG
®
WH 400WS max. 1.5 Nm
Tab. 12 Tightening torques