EN - 12
BAL.0111 • 2020-01-29
6 Putting into operation
ABITIG
®
WH
6.2 Tungsten electrode
The electrode type is set by EN ISO 6848. The max. length of electrode depends on the type
of torch.
3.1 Technical Data on page EN-5
6.3 Connecting the cable assembly
1
Plug the cable assembly connection into the power supply and secure it with a connection
nut.
6.4 Mounting the TIG welding torch system on the robot
1
Fasten the torch clamp
on the cylindrical shaft end of the insulating jacket
with the
screw
2
Mount the torch clamp
, the disc
and the nut
to the
ABICOR BINZEL
CAT torch mount
For proper mounting of the CAT
ABICOR BINZEL
torch mount, please observe the relevant
operating instructions.
NOTE
• The welding performance is affected by the selection of the tungsten electrode and by
wear. A smooth, groove-free sharpened end of the tungsten electrode has a positive effect
on the welding result.
1
Torch clamp
2
Screw
3
Insulating jacket
4
Screw
5
ABICOR BINZEL
CAT
torch mount
6
Disc
7
Nut
Fig. 3
Mounting the TIG welding torch system on the robot
1
3
2
7
5
4
6