EN - 4
3 Safety Instructions
Alignment jig
2.4 Abbreviations
2.5 Nameplate
The Alignment jig is marked on the base plate with the ID number.
When making any inquiries, please remember the following information:
• ID number
3 Safety Instructions
Please observe the attached safety instructions.
3.1 Classification
The warning signs used in the operating instructions are divided into four different levels and are shown prior
to specific work steps. Arranged in descending order of importance, they have the following meaning:
4 Scope of delivery
Order the equipment parts and wear parts separately. Order data and part numbers for the equipment and
wear parts can be found in the current
ABICOR BINZEL
spare and wear parts price lists. The contact for
consulting and ordering can be found in the Internet at
.
ROBO VTS
MIG/MAG welding torch system VTS-Interlock
ABIROB
®
W
MIG/MAG welding torch system W
ABIROB
®
A
Automatic welding torch, air-cooled
ABIROB
®
GC
Automatic welding torch
WH torches
Neck change welding torch
Tab. 2
Abbreviations
DANGER
Describes imminent threatening danger. If not avoided, it may cause severe injuries or death.
WARNING
Describes a potentially dangerous situation. If not avoided, it may result in serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight or minor injuries.
NOTE
Describes the risk of impairing work results or the risk that the work may result in material damage to the
equipment.
• Torch-specific Alignment jig
• Measuring and setting sleeves
• Adjusting lever
• Operating instructions
Tab. 3
Scope of delivery
NOTE
The Alignment jig is delivered to match the corresponding neck change torch with a clamping and guide
device as well as measuring and setting sleeves and adapter.
