Alignment jig
5 Functional Description
EN - 5
4.1 Transport
The components are carefully checked and packaged, however damage may occur during shipping.
5 Functional Description
The torch neck to be tested is clamped into the clamping body according to the bending angle. After a
collision, the torch neck can be realigned slightly by means of the adjusting lever.
5.1 Installing the alignment jig
Checking procedure
on receipt of goods
Make sure that the shipment is complete by referring to the delivery note!
In case of damage
Check the package and components for damage (visual inspection)!
In case of complaints
If the goods have been damaged during transport, contact the last carrier
immediately! Keep the packaging for possible checks by the carrier.
Packaging for return
shipment
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Tab. 4
Transport
WARNING
Danger of crushing
Parts of the body can be crushed between the torch neck and the guide device when aligning the torch
neck during normal operation.
• Keep out of the danger zone.
NOTE
To allow the alignment jig to be screwed on free from distortion surface, the installation surface must be
flat.
