Abicor Binzel AB20, Руководство по эксплуатации

Страница: 9 / 12

EN - 9
AB Series Torches 6 Maintenance and cleaning
6 Maintenance and cleaning
1 Unscrew the torch on the wire feed unit and lay it straight out.
2 Dismount the wire guide liner and replace it if necessary.
3 Remove worn parts from the torch neck.
4 Clean the wire guide liner from both sides with compressed air.
5 Mount the wire guide liner back on the torch.
6 Connect the torch on the wire feed unit.
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Switch off the power supply and close off the gas supply.
• Pull out the mains plug.
WARNING
Risk of injury
Serious injuries caused by parts swirling around.
• When cleaning the wire guide liner with compressed air, wear suitable
protective clothing, in particular safety goggles.