manualshive.com logo in svg
background image

 

EN - 5

AB Series Torches

2 Safety Instructions

2 Safety  Instructions

Observe the enclosed document Safety Instructions.

2.1 Classification

The warning signs used in the operating instructions are divided into four 
different levels and are shown prior to specific work steps. Arranged in 
descending order of importance, they have the following meaning:

2.2 Emergency information

In case of emergency, immediately interrupt the power and shielding gas. 
Further measures can be found in the "Power supply" user manual or in the 
documentation of further peripheral devices.

Contact 
tip



0.6



0.8



1.0



1.2



1.4



1.6

T2 140.D435

140.D436

1

140.D438

140.D439

2

140.D440

140.D441

Cr/Zr/Cu

140.1520

140.1521

140.1523

140.1524

140.1525

140.1526

Tab. 6

Contact tip list

1Standard contact tip for AB20
2 Standard contact tip for AB35/50

DANGER

Describes imminent threatening danger. If not avoided, it will result in fatal or 
extremely critical injuries.

WARNING

Describes a potentially dangerous situation. If not avoided, it may result in 
serious injuries.

CAUTION

Describes a potentially harmful situation. If not avoided, it may result in slight 
or minor injuries.

NOTE

Describes the risk of impairing work results or the risk that may result in 
material damage to the equipment.

Содержание AB20













Отзывы: