1YSA160045-EN - Rev. 5
18 / 33
Figure 25.
Using the Load button write a previously saved configuration, just as with the Load setting option from the menu. The device ID
can be chosen arbitrary by choosing the advanced button:
Figure 26.
The combo box located on the top shows the available IDs for the configuration, while the button below is used to identify the
device by blinking its LED for about 10 seconds. The Ok confirms the choice. It is not possible to assign the same ID to multiple devices.
Once back at the configuration menu, pressing Next get the writing on the devices. A bar will show the progress:
Figure 27.