1YSA160045-EN - Rev. 5
10 / 33
Figure 8.
C.4.4.2.
Simultaneous connection of wiAutoLink units:
It is possible to connect simultaneous up to three devices to administrate them through the appropriate TAB. The application creates
a section uniquely numbered from 1 to 3, containing the respective data. It is also possible to configure the devices simultaneous using the
wizard tool.
Figure 9.
If the devices connected have different configurations, the tool disables parts of the program so the user can interact with the
necessary tools to bring all of them to a uniform version.
C.4.4.3.
USB Tab
Each device is presented on the tab containing all the controls to view and change its status. When a single device is connected it
will be presented on the TAB USB1, and so on up to three. Select the Tab relative to the device of interest.
Figure 10.
On this section all the device information is presented according to the following criteria:
Firmware Type:
Indicates the firmware type. The values can be “APP” (application firmware, full access to all the
features) or “BOOT” (bootloader firmware, to update itself or load the application firmware)
