Commissioning
28 - EN
TZIDC-200, TZIDC-210, TZIDC-220 CI/TZIDC-200/210/220-EN
6.2.2 Request information
When the unit is in bus operation, a variety of information can be called up.
Press the following control buttons to access this information:
Control buttons
Action
Cyclic communication:
Displays the setpoint in % and the setpoint status.
Acyclic communication:
Displays the communication status.
Displays the bus address and operating mode.
ENTER
Displays the software revision.
6.2.3 Operating modes
Selection from the operating level:
• Press and hold down
• Press and release as often as required to display the selected operating mode
• Release
• The position is displayed in % or as a rotation angle
Operating mode
Mode indicator
Position indicator
1.1
Positioning with fixed setpoint
Use or to adjust the setpoint
conf
mA
%
C
°
conf
mA
%
C
°
1.2
Manual adjustment
1)
in the operating range
Adjust with or
2)
conf
mA
%
C
°
conf
mA
%
C
°
1.3
Manual adjustment
1)
in the sensor range
Adjust with or
2)
conf
mA
%
C
°
conf
mA
%
C
°
1) Positioning not active.
2) for high-speed mode: Press and simultaneously.
Содержание TZIDC-200
Страница 2: ......
Страница 33: ...Ex relevant specifications CI TZIDC 200 210 220 EN TZIDC 200 TZIDC 210 TZIDC 220 EN 31...