ABB TZIDC-110, Краткое руководство

Страница: 22 / 44

Installing and commissioning
18 Installing and commissioning 41/18-77 EN
3.3.3 Making the connections
Connecting the bus lines, the shutdown module and the proximity switches or
microswitches:
• Remove 7-10 mm (1/4 - 3/8") of the cable insulation
• Insert the wire ends from the left into the appropriate screw terminal and hand-tighten the
screws (access from above)
Connecting the plug-in module:
• Remove 7-10 mm (1/4 - 3/8") of the cable insulation
• Insert the wire ends from the top into the corresponding screw terminal and hand-tighten the
screws (access from the side)
Fig. 7 Terminal assignment
(11)
(12)
+
-
+85 -86
Basic model
Bus terminals
+41 -42
Limit 2
Limit 1
+51 -52
Limit 1
Limit 2
Kit for digital position feedback
Pepperl & Fuchs proximity switches
Kit for digital position feedback
24 V Microswitch
41 42 43
Limit 2
51 52 53
Limit 1
Grounding screw
Plug-in module for shutdown function
24 V
NC contact
NO contact
Input
NC contact
NO contact
Input