ABB TZIDC-110, Краткое руководство

Страница: 15 / 44

Installing and commissioning
41/18-77 EN Installing and commissioning 11
1. Mount the adapter to the positioner
2. Attach the mounting bracket (1) to the positioner
• Determine the mounting position (in parallel
to the actuator or shifted by 90°).
• Determine the direction of rotation of the
actuator (clockwise or counterclockwise).
• Move rotary actuator to its home position.
• On the basis of the mounting position, the
home position, as well as the direction of
rotation it must be determined in which
position the feedback shaft (1) of the posi-
tioner must be pre-adjusted and in which
position the adapter (2) must be placed, to
enable the positioner to travel within the
proper range (the arrow on the rear of the
device must travel within the admissible
range, see Fig. 1 on page 4).
• Pre-adjust the feedback shaft.
• Place the adapter on the feedback shaft in
the appropriate position and fix it by set-
screws (3); ensure that one of the set-
screws is engaged on the side of the
feedback shaft with the flat.
1
2
3
1
M6 Screws