manualshive.com logo in svg

ABB SmartTouch B/graphite, Руководство по эксплуатации продукта, Страница: 335 / 368

Поделиться
Скачать
ABB SmartTouch B/graphite Скачать руководство пользователя страница 335

 

Operation

 

 

 

 

 

 

Product manual 2CKA001473B5343 

│

335

 

Call history 

All the latest calls accepted and made are shown in the call history. Also snapshots available in 
the call history are displayed.  

 

 

Fig. 58:  Call history 

 
 
 

Pos. Description 

[1] Selected 

video 

call (blue frame) 

[2] 

Call status (missed, incoming, outgoing, internal, external call) 

[3] 

Copying video call from call history 

[4] 

Deleting video call from call history 

[5] 

Saving call history to SD card 

[6] 

Deleting the entire call history 

 

1.  With the use of the functions described above, the calls can be viewed, archived and 

deleted within the call history. 

 

 

Notice - Encryption of videos 

To save video calls, first an SD card must be inserted into the panel. Video calls 
saved on the SD card cannot be read directly from the SD card. If a video call is 
to be opened on an external device, it can be saved on the SD card. For this, the 
video call must be shifted into the history by swiping to the left and then copied.  

 

 

 

Содержание SmartTouch B/graphite

















































































































































































































































































































































































Отзывы:

Нет отзывов