ABB SafePlus 36 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 24

ABB SafePlus 36 Скачать руководство пользователя страница 6

6 SafeRing/SafePlus 36kV

| Installation and operating instruction

2. TRANSPORT AND HANDLING

The units are delivered from the factory ready for installation.

Weight table for standard SafeRing

2-way DeF / DeV

550 kg

3-way CCF / CCV

800 kg

4-way CCCF / CCCV

1050 kg

4-way CCFF / CCVV

1100 kg

3-way CCC

750 kg

4-way CCCC

1000kg

SafePlus

Standard 1-way

300 kg

Standard 2-way

600 kg

3 and 4-way as for SafeRing

The weights are including additional equipment.

SafeRing / SafePlus is fitted with lifting lugs, but can also be
moved on pallets with a forklift truck.

The units are top heavy so please handle with care!

2.1 BY RECEIVING INSPECTION

Upon receiving the SafeRing / SafePlus please check that the
delivered equipment has not been damaged during transport.
If any such damage has occurred, a claim must be submitted
to the carrier immediately.

After unpacking, the following must be checked:

1. Operating handle – 1 piece should be included, normally

fixed on right hand side .

2. Check that the pointer on the pressure indicator is in the

green area.

3. Carry out a function test on the mechanical parts.
Any faults or omissions must be reported immediately to the
supplier.

2.2 STORAGE

SafeRing / SafePlus must be stored under cover in a dry and
well ventilated area until it is installed and put into operation.



SAFERING 36



<90

0

ø30

«
...
4
5
6
7
8
...
»

Содержание SafePlus 36

























Отзывы:

Нет отзывов