manualshive.com logo in svg

ABB SafePlus 36, Инструкция по установке и эксплуатации, Страница: 13 / 24

Поделиться
Скачать
ABB SafePlus 36 Скачать руководство пользователя страница 13

Installation and operating instruction |

 SafeRing/SafePlus 36kV  13

4.3 RELAY AND CURRENT TRANSFORMERS 

  

 

A protection relay is installed in each vacuum circuit-breaker 
module. The cables from the protection relay to the current 
transformers are installed from the factory, and end up in the 
cable compartment, ready for connection to the three current 
transformers supplied.

Before installation:

 

−

Check that the three current transformers have been      
delivered and that they are all of the same type.

 

−

Check that the current transformers are of the correct type, 
with the correctly rated transformer ratio, for the distri-   
bution transformer’s rated current and for the adjustment 
range on the protection relay (see protection relay manual).

Each current transformer must be mounted onto its high    
voltage cable before the cable termination is fitted.

The earth shield on the cable must be led back through the 
centre hole in the current transformer (see figure on left) and 
earthed on the earthing bar in the cable compartment.

A mounting plate for the current transformers is fitted in the 
cable compartment.

After the current transformers have been installed in the unit, 
the cables from the protection relay are connected. Consult 
the manual supplied with the protection relay for a description 
of the connections.

SafeRing / SafePlus with vacuum circuit-breakers are        
prepared for self-powered OCEF protection relay ABB type 
REJ 603.

Relays with auxiliary voltage

SafePlus can be delivered with advanced protection relays: 

 

−

REF610 (integrated LV-compartment with hinged door)

 

−

REF615 (high LV-compartment with hinged door)

 

−

REF630 (high LV-compartment with hinged door)

 

−

REF541 (high LV-compartment with hinged door)

 

−

(high LV-compartment with hinged door)

Separate manuals with examples of settings
have been prepared for each of these protection relays.

Installing current transformers. The cable shielding is led back 
through the centre hole and earthed

V-module with protection relay type REF610 in integrated LV-
compartment with hinged door

130

75

60

130

Содержание SafePlus 36

























Отзывы:

Нет отзывов