Section 8
Removing, repairing and exchanging
8.1
Product lifecycle
GUID-D1A48469-E2DB-4E39-8431-1686F13FFC4D v8
At some point of the product lifecycle, the IED will be upgraded to a next generation unit.
When selecting the original product, already consider the upgrading and extension
possibilities that the specific product offers for its whole lifecycle.
8.2
Checking IED information
GUID-2CAE273B-B384-438A-B21C-C0BC86E203A1 v3
In order to get the following information in SAM600-IO, the service kit is
needed. For more information on service kit, refer
SAM600-IO Technical
manual.
The IED information includes detailed information about the device, such as version and serial
number. To find the information navigate through the LHMI menus as indicated below:
1.
Select Main Menu/Diagnostics/IED status/Product identifiers.
2.
Select a submenu with and .
3.
Enter the selected submenu with .
4.
Browse the information with and .
The Product identifiers submenu contains product related information including product
type, product version, product definition, firmware version, serial number, order number and
production date.
The Installed HW submenu contains information about the HW modules.
The IED information can be retrieved through PCM600, properties window and IED summary.
See Figure
1MRK 514 030-UEN B
Section 8
Removing, repairing and exchanging
Switchgear control unit SAM600-IO
35
Installation manual
© Copyright 2017 ABB. All rights reserved
