A071164 V1 EN
Figure 65:
Setting IP address and subnet mask
5.
Close all open windows by clicking
OK
and start PCM600.
Administrator rights are requested to change the configuration
as described above.
Setting IED's IP address in PCM600
In PCM600 the IED's IP address can be defined either via the first window of the
wizard by including a new IED in the project or by entering the IED's IP address in
the Object Properties window.
1.
Select the IED to which you want to define the IP address.
2.
Open the Object Properties window.
3.
Place the cursor in the IP Address row and enter the IP address.
The used method depends on the time at which the IP address is available. Defining
IP address in the Object Properties windows allows changing the IP address at any
time.
1MRS756708 A
Section 8
Commissioning
615 series
97
Operation Manual
