ABB Relion 670 series, Руководство пользователя

Страница: 83 / 366

Table 5: QCBAY Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC Oper.ctlVal CO - Mod Cmd Mode parameter for 61850
Oper.origin.orCat CO - Mod Cmd Mode parameter for 61850
Oper.origin.orIdent CO - Mod Cmd Mode parameter for 61850
Oper.ctlNum CO - Mod Cmd Mode parameter for 61850
Oper.T CO - Mod Cmd Mode parameter for 61850
Oper.Test CO - Mod Cmd Mode parameter for 61850
Oper.Check CO - Mod Cmd Mode parameter for 61850
stVal ST - - Mon Mode status value parameter for
61850
q ST - - Mon Quality: Mode status value
parameter for 61850
t ST - - Mon Timestamp: Mode status value
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter for 61850
q ST - Beh Mon Quality: Behaviour parameter for
61850
t ST - Beh Mon Timestamp: Behaviour parameter
for 61850
LocSwPos v1_dINS stVal ST - - Mon Position of the Local/Remote
switch
q ST - - Mon Quality: Position of the Local/
Remote switch
t ST - - Mon Timestamp: Position of the Local/
Remote switch
SrcOpPrm v1_dINS stVal ST - PSTO Mon Value for the operator place
allocation
q ST - PSTO Mon Quality: Value for the operator
place allocation
t ST - PSTO Mon Timestamp: Value for the operator
place allocation
BlkCmd v1_dSPC Oper.ctlVal CO - - Cmd Special block command value
used for blockCommand
Oper.origin.orCat CO - - Cmd Special block command value
used for blockCommand
Oper.origin.orIdent CO - - Cmd Special block command value
used for blockCommand
Oper.ctlNum CO - - Cmd Special block command value
used for blockCommand
Oper.T CO - - Cmd Special block command value
used for blockCommand
Oper.Test CO - - Cmd Special block command value
used for blockCommand
Oper.Check CO - - Cmd Special block command value
used for blockCommand
stVal ST - CMD_BLKD Mon Function is blocked for commands
Table continues on next page
1MRK 511 349-UEN -
Section 7
Logical node data model
670 series 2.1 IEC 77
Communication protocol manual