ABB Relion 670 series, Руководство пользователя

Страница: 229 / 366

DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC
t ST - - Mon Timestamp: Mode status value
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter for 61850
q ST - Beh Mon Quality: Behaviour parameter for
61850
t ST - Beh Mon Timestamp: Behaviour parameter
for 61850
Str b_dACD general ST - START Mon General start signal from the
function
q ST - START Mon Quality: General start signal from
the function
t ST - START Mon Timestamp: General start signal
from the function
Op b_dACT general ST T TRIP Mon General trip signal from the
function
q ST T TRIP Mon Quality: General trip signal from
the function
t ST T TRIP Mon Timestamp: General trip signal
from the function
BlkGnStr v1_dSPS stVal ST - BLKRECL Mon Block machine closing command
q ST - BLKRECL Mon Quality: Block machine closing
command
t ST - BLKRECL Mon Timestamp: Block machine
closing command
LO v1_dSPS stVal ST - LOCKOUT Mon Trip lockout output (latched)
q ST - LOCKOUT Mon Quality: Trip lockout output
(latched)
t ST - LOCKOUT Mon Timestamp: Trip lockout output
(latched)
AlmRpl v1_dSPS stVal ST - ALRIPPLE Mon Ripple alarm, is set (with delay-on
20ms) if instRippleAlarm is active
longer than tAlarmRipple
q ST - ALRIPPLE Mon Quality: Ripple alarm, is set (with
delay-on 20ms) if instRippleAlarm
is active longer than tAlarmRipple
t ST - ALRIPPLE Mon Timestamp: Ripple alarm, is set
(with delay-on 20ms) if
instRippleAlarm is active longer
than tAlarmRipple
StrAUn v2_dACD general ST - STARTUC Mon Start signal from under-current
feature
q ST - STARTUC Mon Quality: Start signal from under-
current feature
t ST - STARTUC Mon Timestamp: Start signal from
under-current feature
OpAUn v2_dACT general ST - TRIPUC Mon Trip signal from under-current
feature
q ST - TRIPUC Mon Quality: Trip signal from under-
current feature
Table continues on next page
1MRK 511 349-UEN -
Section 7
Logical node data model
670 series 2.1 IEC 223
Communication protocol manual