Section 7
Operating procedures
7.1
Monitoring
7.1.1
Indications
GUID-E3CC6AB4-D6C4-4504-A0F2-CA76EA3D7FCD v10
The operation of the IED can be monitored via three different indications on the
LHMI.
•
Three indicator LEDs with fixed functionality: Ready, Start and Trip
•
15 programmable three-color alarm LEDs which can present 45 virtual LED
states
•
For each on state LED color and for the LED off state, texts can be
programmed with PCM600 and via LHMI. These texts are displayed on
the LHMI.
•
An auto-indicating message on the display.
7.1.1.1
Using auto-indication messages
AMU0600430 v9
Auto-indication messages are shown in a dialog box that is displayed when the
disturbance recorder is triggered. The indication dialog box shows a list of current
disturbance recordings one by one. To scroll the dialog, use
and
.
To activate the auto-indication message function, the disturbance
recorder function has to be activated and properly configured.
Check also that the setting
Main menu/Configuration/HMI/
Screen/SCREEN:1/AutoIndicationDRP
is set to
On
.
1.
Read the auto-indication message in the dialog box.
The message contains the same information that is available for disturbance
recordings.
2.
Press
to see more detailed information.
3.
Press
to close the auto-indication message without clearing it or press
to activate the Clear view and to clear messages.
1MRK 500 128-UEN B
Section 7
Operating procedures
650 series 2.2 IEC
61
Operation manual
