4.
Select
OK
on the on-screen keyboard and press
to stop editing the user
name.
5.
Press
to select the Password field and press
to activate it.
An on-screen keyboard is shown.
Each added character is shown for a short time, then hidden with an asterisk
character ‘*’ to enhance security. You can end password editing at any time
by pressing
while the password field is focused (or navigate to the OK
button and press
) to attempt to login, or press
(or navigate to the
Cancel button and press
) to abort the login attempt.
When the cursor is moved, the newly selected character is shown for a short
time.
IEC15000061.vsdx
IEC15000061 V1 EN-US
6.
Type in the password using the on-screen keyboard.
IEC12000157-3-en.vsd
IEC12000157 V3 EN-US
Figure 17:
Entering the password
Passwords are case sensitive.
Only characters A - Z, a - z and 0 - 9 shall be used in user
names. User names are not case sensitive. For passwords see
the Password policies in PCM600.
7.
Select
OK
on the on-screen keyboard and press
to stop editing the
password.
8.
Select
OK
in the
Log on
dialog and press
to confirm the login, or press
or Cancel to cancel the procedure.
If the login fails, a message is displayed on the display.
1MRK 500 128-UEN B
Section 5
Using the HMI
650 series 2.2 IEC
41
Operation manual
