IEC13000245-1-en.vsd
GUID-8D804426-35FD-48A8-9E63-CCBB625327EA V1 EN-US
Figure 32:
Confirming settings
•
To exit without saving changes, select
No
and press
.
•
To cancel saving settings, select
Cancel
and press
.
Pressing
Cancel
in the Save changes dialog closes only the Save
changes dialog box, but the IED remains in editing mode. All the
changes applied to any setting are not lost and the user can continue
to change settings. To leave the change setting mode, select
No
or
Yes
in the Save changes dialog.
After changing the parameters marked with !, the IED restarts
automatically for the changes to take effect.
5.1.15
Clearing and acknowledging
AMU0600425 v10
The Clear button is used to reset, acknowledge or clear all messages and
indications, including LEDs and latched outputs as well as registers and recordings.
Press the Clear button to activate a selection menu, and select the wanted clearance
or reset function. Events and alarms assigned to alarm LEDs are cleared with the
Clear button as well.
1.
Press
to activate the Clear view.
1MRK 500 128-UEN B
Section 5
Using the HMI
650 series 2.2 IEC
53
Operation manual
