DNP3 device profile document
Pulse off
○
Never
○
Always
●
Sometimes
○
Configurable
Latch on
○
Never
○
Always
●
Sometimes
○
Configurable
Latch off
○
Never
○
Always
●
Sometimes
○
Configurable
Queue
●
Never
○
Always
○
Sometimes
○
Configurable
Clear queue
●
Never
○
Always
○
Sometimes
○
Configurable
Explanation of "Sometimes" above: Supported binary output control operations depend on the type of point. Please consult the
binary output point list description.
Reports binary input change events when no specific variation
requested:
Reports time-tagged binary input change events when no specific
variation requested:
○
Never
○
Never
○
Only when time-tagged
○
Binary input change with time
○
Only non-time-tagged
○
Binary input change with relative time
●
Configurable to send one or the other
(Obj2DefVar on DNP3Master)
●
Configurable (Obj2DefVar on DNP3Master)
Sends unsolicited responses:
Sends static data in unsolicited responses:
○
Never
●
Never
●
Configurable (UREnable on
DNP3Master)
○
When device restarts
○
Only certain objects
○
When status flags change
○
Sometimes (attach explanation)
●
ENABLE/DISABLE UNSOLICITED
function codes supported
No other options are permitted.
Default counter object/variation:
Counters roll over at:
○
No counters reported
○
No counters reported
●
Configurable (obj20DefVar and
obj22DefVar in DNP3Master)
○
Configurable (attach explanation)
○
Default object
Default variation:
○
16 bits
○
Point-by-point list attached
●
32 bits
○
Other value: _______
○
Point-by-point list attached
Sends multi-fragment responses:
○
Yes
○
No
●
Configurable (ApplMultFrgRes on DNP3Master)
Deadbanding is not performed in the DNP protocol stack. Any deadbanding is a property of the IED’s underlying data and is
configured through the IED configuration tools.
●
= Selected,
○
= Not selected
1MRK 511 244-UUS A
Section 3
DNP3 protocol implementation
DNP, 650 series
39
Point list manual
© Copyright 2011 ABB. All rights reserved
