ABB PVS-175-TL Series, Быстрое руководство по установке, Страница: 15 / 46

15
EN
7. Mounting Instructions
7.1 Bracket assembly
• Assembly the two side bracket pieces together
with the central bracket, by sliding it as shown in
the picture and paying attention to the orientation
of the pieces (refer to arrow and “UP” markings
on the brackets): side brackets arrow have to be
turned downwards, central bracket have to be
turned upwards.
• Slide the central bracket in order to match the
two holes with the centerning pins of the side
brackets.
• Use the two M8 screws with flat and spring
washers (supplied) to fix the pieces of the bracket
together.
• Position the bracket (03) perfectly level on the
support and use it as drilling template (consider
the overall dimensions of the power module and
the wiring box).
• It is the installer’s responsibility to choose
an appropriate number and distribution of
attachment points. The choice must be based
on the type of support (wall, frame or other
support), the type of anchors to be used, and
their ability to support 4 times the inverter’s
weight (4x153Kg=612Kg for all models).