10
…Installation
Ethernet card status LEDs
The 6 LEDs on the Ethernet card indicate the status of each port and the network.
To enable card status indication in the upper HMI Line, navigate to
Display
>
Display Tag
>
Ethernet Status
.
LED
Status
HMI display
Description
A
Port 1
ON
Network connection (link up)
OFF
No network
B
Activity 1
Flashing or ON
Traffic
OFF
No traffic
C
Port 2
ON
Network connection (link up)
OFF
No network
D
Activity 2
Flashing or ON
Traffic
OFF
No traffic
E
Module Status (Mod)
Green, ON
Mod showing
<G>
continously
Device ready for Operation. Working
properly
Green, flashing (1 Hz)
Mod changing between
<G>
and
< >
Standby. Device not configured yet
Green/ red, flashing (1Hz)
Device performs "Power-On" Test
Red, flashing (1 Hz)
Mod changing between
<R>
and
< >
Simple Error, which can be fixed
Red, ON
Mod showing
<R>
continously
Major Error. Non removable serious
error
OFF
Mod showing
< >
continously
No Power
F
Network Status (Net)
Green, ON
Net showing
<G>
continously
Connected. Device has at least one
established connection
Green, flashing (1 Hz)
Net changing between
<G>
and
< >
No Connection. Device did not
establish any connections, but was
assigned an IP address
Green/red, flashing (1 Hz)
Device performs "Power-On" Test
Red, ON
Net showing
<R>
continously
Dublicated IP address. Device has
detected that the device IP address
is already in use
OFF
Mod showing
< >
continously
No supply voltage or IP Address.
Red, flashing (1 Hz)
Mod changing between
<R>
and
< >
Connection timeout
Note
For card status indication in the upper HMI Line, navigate to
Display
>
Display Tag
>
Ethernet Status
.
B
A
C
D
E
F
P R O C E S S M A S T E R
W A F E R
F E
M
6 3 0
| COM/FE
M
630/E/MB
-
EN RE
V. A
