9
Parameterization for start-up
On initial start, do the steps that follow:
1
Make sure that the transmitter is connected to the Ethernet.
2
Log on to the flowmeter and set the parameters:
a
Set
DHCP Client
to
enabled
.
b
Make sure that the flowmeter IP address (host IP address)
is set.
c
Set
Webserver Access
to
Full
.
d
Set
EtherNet IP Access
to
Full
.
e
Set
Display Tag
to
Bus Address
.
Communication
Ethernet
General
Internet layer
DHCP client
enabled
Host IP address
192.168.1.122
Subnet mask
Webserver
Access
Full
Ethernet IP
Access
Full
Display
Language
Contrast
Operator Page 1
Operator Page 2
Autoscroll
Flow Format
Date Format
Display Tag
Bus Address (Ethernet address)
P R O C E S S M A S T E R
W A F E R
F E
M
6 3 0
| COM/FE
M
630/E/MB
-
EN RE
V. A
