ABB GLA131 Series Microportable Analyzers
User Manual
ABB PROPRIETARY INFORMATION
73
If you try to add a user and are in the User group (instead of the Admin or Service
group), a dialog box (Figure 24) appears, and you must cancel the action.
Delete User
To delete a user, perform the following:
NOTE
Only users belonging to the Admin and Service groups can delete
users.
1. From the
Setup
screen, click the Security tab.
2. Click Group/User Account: The
Users
dialog-box shown in Figure 62
appears.
3. Click Delete next to the user you want to delete.
If you try to delete a user and are in the User group (instead of the Admin or Service
group), a dialog box (Figure 24) appears, and you must cancel the action.
Set ICOS Default Data
The
Set ICOS Default Data
feature removes all measurement data and created
users, and disables the VNC server. This feature may be applicable when the
analyzer is decommissioned or released from active service.
This feature requires the lgr user Linux account and does the following:
Sets default passwords in the user management group
Removes all measurement data and created users
Disables the VNC server
To set the ICOS default settings, perform the following:
1. From the
Setup
screen, click the Security tab.
2. Click Clean Icos Data: The
Clear Icos Data
appears.
Figure 63: Clear Icos Data Dialog-Box
