ABB FSM4000 Series, Руководство по эксплуатации

Страница: 29 / 68

D184B122U02 S4 29
Submenu/
Parameter Submenu/
Parameter
Submenu/
Parameter Selections
Value Range
Comments
Meter size
view only
1 mm 1/25 in
1.5 mm 1/17 in
2 mm 1/12 in
3 mm 1/10 in
4 mm 5/32 in
6 mm 1/4 in
8 mm 5/16 in
10 mm 3/8 in
15 mm 1/2 in
20 mm 3/4 in
25 mm 1 in
32 mm 1-1/4 in
40 mm 1-1/2 in
50 mm 2 in
65 mm 2-1/2 in
80 mm 3 in
100 mm 4 in
125 mm 5 in
150 mm 6 in
200 mm 8 in
250 mm 10 in
300 mm 12 in
350 mm 14 in
400 mm 16 in
450 mm 18 in
500 mm 20 in
600 mm 24 in
700 mm 28 in
750 mm 30 in
800 mm 32 in
900 mm 36 in
1000 mm 40 in Display of the flowmeter size. Not displayed
when no flowmeter type has been selected
(Type of primary = none).
1 mm 1/25 in
Span Cs view only
Flowmeter primary span value Cs.
For "Older Model" always 100 %.
100.0 %
Zero Cz view only
Flowmeter primary zero value Cz.
For "Older Model" always 0 %.
0.0 %
Phase view only
Phase difference between reference and
signal voltages.
90
Reference voltage view only
Display of the reference voltage value, for
selection "Older Model". Not displayed for
Model 10D1422.
70 mV
Order Number view only
Display of the ABB-Order Number of the
flowmeter primary.
„----------------------“
Primary Setup
Only for selection
„Older Model“ Display required for "Older Model". Use EN-
TER Function and STEP-key to access the
parameters: Mains Frequency, Type of Pri-
mary, Meter Size, Reference Voltage one af-
ter the other and change as required. Not
displayed when a newer flowmeter primary
model is connected!
See also Chapter 10.
ENTER