ABB FS4000-SR4, Руководство по эксплуатации, Страница: 78 / 136

Parameterization
78 FV4000-VT4/VR4 / FS4000-ST4/SR4 D184B097U02
Buttons Menu item Buttons Set parameter Buttons
Configurable
parameters
Comments
„Enter“ + „Enter“ „Data“
„Step“
Einheit
Temp
„Enter“
°C_ F_ Selection:
°C, F, K
„Enter“ „Data“
„Step“
Bezugs-
Temp
20.0 °C
Selection:
-200.0 ... 500
The menu appears when the following operating
modes are selected:
Fluid Qm (D), fluid Qm (D,T), gas standard Qn (Kmpf)
„Enter“ + „Data“
„Step“
Druck
Pbtr abs
„Enter“
1.0 bar The menu appears when the following operating
mode is selected:
Gas mass Qm (pT)
„Enter“ + „Data“
„Step“
Vol.Aus-
dehnung
„Enter“
1.00 %./K The menu appears when the following operating
mode is selected:
Fluid Qm (V,T)
„Enter“ + „Data“
„Step“
D. Ausg.
koeffi
„Enter“
1.00 %./K
The menu appears when the following operating
mode is selected:
Fluid Qm (D,T)
„Enter“ + „Step“ „Data“
„Step“
Einheit
Qvol „Enter“
l/s _ l/m _ Selection:
l/s, l/m, l/h, m3/s, m3/m, m3/h, m3/d, ft3/s, ft3/m, ft3/h,
ft3/d, usgps, usgpm, usgph, usmgd, igps, igpm, igph,
igpd, bbl/s, bbl/m, bbl/h, bbl/d
The menu appears when the following operating
modes are selected:
Fluid Qm (D,T), fluid Qm (V,T), gas mass Qm (pT),
gas mass Qm (D)
„Enter“ + „Step“ „Data“
„Step“
Einheit
Qm „Enter“
g/s _ g/m _ Selection:
g/s, g/m, g/h, kg/s, kg/m, kg/h, kg/d, t/m, t/h, t/d, lb/s,
lb/m, lb/h, lb/d
The menu appears when the following operating
modes are selected:
Fluid Qm (D), fluid Qm (D,T),
gas standard Qn (Kmpf), gas mass Qm (pT),
gas mass Qm (D)
Important
The "Qvol" and "Qm" parameters are
dependent upon the selection made under
"Operating mode".