![background image](http://html.mh-extra.com/html/abb/dcs-600-multidrive-series/dcs-600-multidrive-series_operating-instructions-manual_4557015.webp)
Chapter 2 - Start-Up Instructions
DCS 600 Operating Instructions
IV F
2 - 3
Internal signal connections
The software of the units series DCS 600 is divided into two parts which are handled
by processors integrated in the respective boards
SDCS-CON-2
(Software 15.2xx)
and
SDCS-AMC-DC (Software 15.6xx)
.
The upload of signals from SDCS-CON-2 to SDCS-AMC-DC board are operated by:
•
6 automatic channels
•
11 programmable channels, selectable in group 94 (see
Software description - chapter
31
)
The 6 automatic channels are used by the functions:
•
Display
signals at control panel CDP 312
•
Monitor
signals at Drive
Window
Tool
•
Data Logger
at Drive
Window
Tool
If
•
more than 6 signals of the SDCS-CON-2 board are selected, or
•
the function
Signals and Parameter
of Drive
Window
, or
•
the overriding control (AC 80, AC 70…)
is used for monitoring, the signals should be selected in group 94.xx
Note:
In the below mentioned tables
AMC / CON-2
will be used as type designations
instead of
SDCS-AMC-DC / SDCS-CON-2
.
•
Fixed (defined) values
Cyclic transmission is used for fixed values. Fixed values are:
Cyclic transmission
Parameter
Function
Cyclic trans-
from
-->
to
mission time
AMC
--> CON-2
Internal Control Word
2 ms
AMC
--> CON-2
Reserved
2 ms
AMC
--> CON-2
2.13
Torque reference value
2 ms
AMC
--> CON-2
5.06
Analogue output 1
2 ms
AMC
--> CON-2
5.07
Analogue output 2
2 ms
AMC
--> CON-2
Local reference 3
8 ms
Содержание DCS 600 MultiDrive Series
Страница 4: ...DCS 600 Operating Instructions ...
Страница 10: ...vi DCS 600 Operating Instructions ...