![background image](http://html.mh-extra.com/html/abb/dcs-600-multidrive-series/dcs-600-multidrive-series_operating-instructions-manual_4557046.webp)
Chapter 2 - Start-Up Instructions
IV F
2 - 34
DCS 600 Operating Instructions
DCS 600 and DCF 600 by FEXlink
Hardware
DCS 600
SDCS-AMC-DC or AMC-DC Classic board
DCF 601/
SDCS-AMC-DC or AMC-DC Classic board
DCF 602
Configuration For first field exciter
DCS 600 without SDCS-FEX-1 / SDCS-FEX-2
DCF 600 connection by FEXlink (X16)
Maincontactor of DCF 600 controlled by armature converter (FEXlink X16)
DCF 600
DI1 = H
⇒
connected to 48V
DI2 = H
⇒
connected to DCF 506
Associated publications
DCS 600
Technical Data
3ADW000054R0301
ABB Lampertheim
Software Description
3ADW000076R0401
ABB Lampertheim
Database
GLOBAL\DEIND\DEIND051.NSF
Software settings
DCS 600
Parameter
41.03
=
Rated field current
(only used for display)
DCF 601/
Parameter
15.16
=
5
operation mode
DCF 602
Parameter
15.21
=
1
Node = First field exciter
Parameter
15.22
=
2
FEXlink command
Parameter
46.07
=
3
FEXLINK
Parameter
43.13
=
4 or higher
Parameter
99.03
=
Rated field current of
the motor
Note:
Resetting of DCF 600 with FEXlink control (X16) is performed by switching OFF
(DISABLE reference) and ON (ENABLE reference) again:
Control Panel key
⇒
Control Panel key
(when in LOCAL mode)
(when in LOCAL mode)
Содержание DCS 600 MultiDrive Series
Страница 4: ...DCS 600 Operating Instructions ...
Страница 10: ...vi DCS 600 Operating Instructions ...