ABB CoreSense, Руководство пользователя

Страница: 17 / 122

Preparing for installation
13
NOTICE – CYBERSECURITY
This product is designed to be connected to and to communicate information
and data via a network interface. It is the user’s sole responsibility to provide and
continuously ensure a secure connection between the product and the user network
or any other network (as the case may be). Users shall establish and maintain any
and all appropriate measures (such as, but not limited to, the installation of firewalls,
application of authentication measures, encryption of data, installation of anti-virus
programs, etc.) to protect the product, the network, its system, and the interface
against any kind of security breaches, unauthorized access, interference, intrusion,
leakage and/or theft of data or information. ABB Inc. and its affiliates are not liable for
damages and/or losses related to such security breaches, any unauthorized access,
interference, intrusion, leakage and/or theft of data or information.
ABB strives to maintain cybersecurity for its products and services. By visiting the web
page, you will find notifications about newly found software vulnerabilities and options
to download the latest software. It is recommended that you visit this web page
regularly:
http://new.abb.com/about/technology/cyber-security
Information about your product is also available on the product page:
http://new.abb.com/products/transformers/service/advanced-services/coresense
If you are planning on connecting to the Ethernet port or the optional optical Ethernet port, contact
your network administrator to confirm the network settings and check that the service ports described
in the table below are accessible. The SCADA Ethernet port and the optional optical Ethernet port are
configured at the factory as DHCP clients. Ethernet ports may also be configured with static IP settings.
The service Ethernet port is configured as a DHCP server and will automatically assign an IP address to
your laptop/PC in the 172.16.100.x range. The default server address on the
service
port is 172.16.100.1.
—
Table 5
Application TCP ports
Application Port
Web interface 80/tcp
IEC61850 MMS 102/tcp
Modbus tCp 502/tcp
DNp3 20000/tcp
aBB diagnostic port 22/tcp
DhCp 67/udp & 68/udp
NOTICE
The ABB TCP diagnostic port can be enabled and disabled using the web interface.