ABB CDD, Руководство по эксплуатации продукта

Страница: 27 / 53

- 27 -
01
1CH5
A
cquisition process
The acquisition of the MICRO Inverters by the CDD can be performed directly from the CDD display or with a
PC or Tablet connected via a Wireless network or Ethernet cable using the CDD “web user interface”.
In order to improve the acquisition process it is strongly recommended to pre-acquire all MICROs before
mounting them on the roof using the “MICRO Pre-installation Kit” and related guidelines (visit the website or
contact tech support to obtain information about this).
A
cquire the MICRO inverters using the CDD display menu
System coordinates* and time zone must be input (or confirmed if previously entered) before acquisition of the
MICRO inverters can begin. This step is will initiate the acquisition of the inverters.
• From the GENERAL INFORMATION display, press and hold the UP and DOWN buttons together until the
Set Password screen appears. Enter the default password (0010) to access the menus.
• Use the UP and DOWN buttons to navigate to the CHANGE
SETTINGS menu.
• Press ENTER and scroll to DOWN to Micro Manager >
• The MicroManager, [ADD] Inverter > screen opens.
• Press ENTER and the Lat/Long screen opens.
• Use the UP and DOWN keys to enter the latitude and longitude of
the system*
• Press ENTER to confirm and the Set Timezone screen opens.
• Use the UP and DOWN keys to select the applicable time zone.
• Press ENTER to confirm and the CDD will immediately begin
scanning for inverters to acquire.
*To determine latitude/longitude, go to Maps.Google.com and enter an address. When
the map opens, right-click on the pointer and select “ What’s here ” from the dropdown
menu. Latitude/longitude will appear in the address bar and also under the green
arrow on the map. If a negative sign (-) is given, enter it along with Lat and/or Long.
5
Acquire the MICRO inverters
Micro Manager
>
Micro Manager
[ADD]Inverters >
Lat: N00.00
Long:E000.00
Set Timezone
GMT: +00.00 >
Micro Manager
>
Micro Manager
[ADD]Inverters >
Lat: N00.00
Long:E000.00
Set Timezone
GMT: +00.00 >
Micro Manager
>
Micro Manager
[ADD]Inverters >
Lat: N00.00
Long:E000.00
Set Timezone
GMT: +00.00 >