ABB CDD Скачать руководство пользователя

Страница: 20 / 53

- 20 -

008CC3

4 - Connect and configure the CDD

Direct to the computer using an Ethernet cable

This type of connection should only be used for configuration of the system to access the CDD internal

configuration pages (local web server)

CDD

Ethernet cable

If the computer is directly connected to the CDD without a router, and if the computer is set for

an automatic IP address, it is necessary to change the Network settings on the computer fol-

lowing the procedure below:

•

Click on the internet icon in the computer system tray and open the

Network and Sharing

Center

•

Click

Local Area Connection (LAN)

•

Click

Properties

•

Click

Internet Protocol Version 4 (TCP/IPv4)

•

Click

Get the following IP address

and type a different IP Gateway address from that of the

CDD (e.g. if the CDD IP gateway address is 192.168.0.100, type 192.168.0.101) and click

•

The IP Gateway address of the CDD is shown on the display by pressing any button and

scrolling DOWN the basic list.

•

Once these parameters are changed, input the IP Gateway address of the (CDD) in the

address bar of the Internet Browser to proceed with the acquisition of the plant.

•

To reset the wireless connection on the computer, follow the steps in reverse order.

irmware upgrade

It is recommended to upgrade the CDD firmware when connection to the internet is complete.

The firmware upgrade can be done in three different ways:

1. Firmware updgrade using the CDD display menu.

2. Firmware upgrade using the CDD web user interface (with either Ethernet or wireless

connection).

See System monitoring, part 6, for instructions to upgrade using method 1 or 2.

2. CDD Firmware update using Aurora Vision

A firmware update from Aurora Vision will be completed automatically following the procedure for self-

registration found in part 6.

Содержание CDD





















































Результаты поиска

Содержание CDD

Отзывы:

Похожие инструкции для CDD

Бренды по названию

Популярные бренды

ABB CDD, Руководство по эксплуатации продукта

Результаты поиска

Содержание CDD

Отзывы:

Похожие инструкции для CDD

Бренды по названию

Популярные бренды