ABB Aztec 600 Color Скачать руководство пользователя страница 90

Страница: 90 / 110

Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate

Single- and multi-stream colorimetric analyzers

Appendix C

–

Principle of Operation

IM/AZT6CR–EN Rev. R

Aztec 600

Manganese

Formaldoxime Based on the red / orange complex formed

between formaldoxime and Manganese in a
suitably buffered solution.

1. Rinse cell with sample.

2. Bring in sample.

3. Measure background absorbance.

4. Bring in Buffer reagent.

5. Bring in formaldoxime color reagent.

6. Wait for 2 minutes.

7. Bring in Iron complexing reagent.

8. Mix with air.

9. Wait 5 minutes for color to develop.

10. Measure final absorbance.

Aztec 600

Manganese

Low Range

Malachite

Green

Based on the malachite green triphenyl dye
which is formed in an oxidation reaction involving
manganese and leucomalachite green.

1. Rinse cell with sample.

2. Bring in preconditioner to remove chlorine interference.

3. Bring in sample.

4. Wait for 30 seconds.

5. Measure background absorbance.

6. Bring in bring in buffer/oxidant.

7. Wait 5 minutes.

8. Bring in color forming reagent.

9. Mix with air.

10. Wait 3 minutes for color to develop.

11. Measure final absorbance.

Aztec 600

Phosphate

Phosphomoly-

bdenum Blue

Based  on  the  yellow  complex  formed  between
molybdate and phosphate.  The reducing  agent
then  modifies  this  complex  to  give  the
phosphomolybdenum blue color.

1. Rinse with sample.

2. Bring in Acid Molybdate reagent.

3. Bring in sample.

4. Measure background absorbance.

5. Wait 1 minute 30 seconds.

6. Bring in reducing agent.

7. Mix with air.

8. Wait for 11 minutes for color to develop.

9. Measure final absorbance.

Analyzer

Chemical

Method

Principle of Measurement

Analyzer Sequence

Table C.2 Chemical Measurement Methods Used (Continued)

Содержание Aztec 600 Color















































































































Результаты поиска

Содержание Aztec 600 Color

Отзывы:

ABB Aztec 600 Color, Руководство пользователя, Страница: 90 / 110

Результаты поиска

Содержание Aztec 600 Color

Отзывы: